⇄ 

Übersetzung für 'PCB design' von Englisch nach Deutsch

PCB design

PCB-Design {n}

---

printed circuit board design <PCB design>

Platinendesign {n}

---

Werbung

PCB-contaminated {adj}

PCB-verseucht

PCB-kontaminiertecol.

PCB-belastetecol.

PCB panel

Leiterplattennutzen {m}electr.

Leiterplatten-Nutzen {m}electr.

PCB production

Leiterplattenherstellung {f}ind.

PC board <PCB>

gedruckte Leiterplatte {f}electr.

flex-rigid PCB

Starrflex-Leiterplatte {f}tech.

printed circuit board <PCB>

Leiterplatte {f} <LP>electr.

gedruckte Leiterplatte {f}electr.

Flachbaugruppe {f} [häufig auch im Deutschen PCB]electr.

gedruckte Schaltung {f}electr.

Platine {f}electr.

PCB screen / silk printing

Leiterplatten-Siebdruck {m}electr.

personnel certification body <PCB>

Personenzertifizierungs­stelle {f}educ.

PC board <PCB> [short: printed circuit board]

Flachbaugruppe {f} <FBG>electr.

electronic printed circuit board assembly <PCBA, PCB assembly>

elektronische Baugruppe {f}electr.

printed circuit board layout <PCB layout>

Druckbild {n} [bei Flachbaugruppen]electr.

Platinenlayout {n}electr.

piggyback circuit board <piggyback PCB>

Huckepack-Platine {f}electr.

• PCB-Design {n} = PCB design
• PCB-verseucht = PCB-contaminated
• PCB-belastet = PCB-contaminated
• PCB-kontaminiert = PCB-contaminated
• polychlorierte Biphenyle {pl} <PCB> = polychlorinated biphenyls <PCBs>
• Design- = designer [attr.]
• Design {n} = styling
• Design {n} = design
• Design-Auszeichnung {f} = design award
• geschütztes Design {n} = registered design
• Airbrush-Design {n} = airbrush design
• kombinatorisches Design {n} = combinatorial design
• Mode-Design {n} = fashion design
• Design-Ikone {f} = design icon
• Block-Design {n} = block design
• Drug-Design {n} = drug design <DD>
• Design Space {m} = design space
• Design-Klassiker {m} = design classic
• Produkt-Design {n} = product design
• Sampling-Design {n} = sampling design
• unkonventionelles Design {n} = unconventional design

• In 1984, Ruhama established a PCB design company.
• 0 for Windows, the world's first Windows-based PCB design system.
• Certified Interconnect Designer (CID) is a certification from the IPC Designer's Council for experienced PCB design professionals. CID+ is the "advanced" version of this certification.
• A good example is his illustration of the matrix of rising edges that result from different combinations of skin-effect and dielectric loss which illustrates PCB design problems one encounters at microwave frequencies.
• Soon thereafter, ULTIboard became marketing leader in Europe in the field of PC based PCB design products.

• In the PCB design process, DFM leads to a set of design guidelines that attempt to ensure manufacturability. By doing so, probable production problems may be addressed during the design stage.
• Modern PCB design software typically provides "interactive routers"—the drafter selects a pad and clicks a few places to give the EDA tool an idea of where to go, and the EDA tool tries to place wires as close to that path as possible without violating design rule checking (DRC).
• Regarding power level, looks, inner mechanics and PCB design both units are identical.
• OrCAD is a suite of products for PCB Design and analysis that includes a schematic editor (Capture), an analog/mixed-signal circuit simulator (PSpice), and a PCB board layout solution (PCB Designer Professional).
• In printed circuit board (PCB) design, a via consists of two pads in corresponding positions on different copper layers of the board, that are electrically connected by a hole through the board.

• Since it was quite easy to stack interconnections (wires) inside the embedding matrix, the approach allowed designers to forget completely about the routing of wires (usually a time-consuming operation of PCB design): Anywhere the designer needs a connection, the machine will draw a wire in a straight line from one location/pin to another.
• Most PCB design tools support such differential pairs.
• is a CAD computer program for EDA and PCB design, developed by Ing.-Büro Friedrich in Germany.
• Mini-ATX motherboards are a smaller form factor of the ATX motherboards, They typically use surface-mount technology for component placement, solid state capacitors to ensure stable power delivery and an 8-layer PCB design to increase durability and longevity.
• Similarly, a tool for schematic-capture and analog simulation can generally be used both for IC analog design and for PCB design.

• ] design. Power dissipation will result in temperature difference and pose a thermal problem to a chip.