Übersetzung für 'chip the edge' von Englisch nach Deutsch

to chip the edge

kanten

die Kante abschlagen

---

to chip the edge of sth.

die Kante brechen

---

Werbung

chip-to-chip time

Span-zu-Span-Zeit {f}tech.

chip-chip [Pardalotus striatus]

Streifen-Panthervogel {m}orn.T

chip off the old block

echter Spross {m}idiom

a chip off the old block

ganz die Mutter

to chip the ball into the net

den Ball ins Tor schlenzen [Fußball]sports

He's a chip off the old block.

Er ist ganz der Vater.idiom

He is a chip off the old block. [coll.]

Der Apfel fällt nicht weit vom Stamm.proverb

on the edge {adv}

am Rande

an der Grenze

an der Kante

along the edge {adv}

am Rand entlang

at the edge {adv}

auf der Kante

am Rand

am Rande

to edge towards the stage

zur Bühne drängentheatre

edge of (the) stage

Bühnenrand {m}theatre

to edge towards the exit

zum Ausgang drängen

edge of the forest

Waldessaum {m} [geh.]

direction of the edge

Kantenrichtung {f}

edge of the bed

Bettkante {f}

• All of the logic functions of a calculator had been squeezed into the first "calculator on a chip" integrated circuits (ICs) in 1971, but this was leading edge technology of the time and yields were low and costs were high.
• The difference in height between the leading cutting edge and the depth gauge determines the thickness of the wood chip taken by the cutter.
• This newer shape allows for the golfer to "open" the clubface for short, high-backspin chip shots that "stick" on the green or even roll backwards, without the wide heel lifting the bottom edge of the club at address or the additional angle providing too much bounce.
• Despite using a professional drawing board, he emphasizes that any inexpensive board large enough to hold the paper is sufficient, as he mostly uses a piece of roughly cut chip-board leaning on the edge of his desk.
• Care was needed in grinding the blanks and these were marked at one end to show the correct orientation, without which the cutting edge could chip prematurely.

• Some slaves require a falling edge of the chip select signal to initiate an action.
• Depending on the exact steel and heat treatment used, at best a steel cutting board will wear the edge on knives quickly; at worst chip, dent, or roll it like glass.
• Teeth design comes in many variations: ATB (alternating top bevel), FTG (flat top grind) and TCG (triple chip grind) are the most common.
• It is unclear to Baltar whether these projections are from a chip Number Six implanted in his brain while they were together on Caprica (the explanation originally given by the Number Six vision, which she later disclaimed) or if she is simply a manifestation of Baltar's own mind.
• The RL/HD has a battery-backed real-time clock chip to store date and time information, which the RL lacked.

• The follow-on chip from this family, the MPC8260, has a 603e-based core and a different CPM.
• However, the straight flute is poor at chip ejection, and can cause a burr to be formed on the exit side of the hole, more so than a spiral twist drill bit turning at high speed.
• The drivers may be installed using several methods, the most common of which are COG (Chip-On-Glass) and TAB (Tape-automated bonding) These same principles apply also for smartphone screens that are much smaller than TV screens.
• In 2012, Oliver "Chip" Gordon Brewer III was named CEO of Callaway.
• IBM chose to design custom hybrid circuits using discrete, flip chip-mounted, glass-encapsulated transistors and diodes, with silk-screened resistors on a ceramic substrate, forming an SLT module.

• Harder steels take sharper edges, but are more brittle and hence chip more easily, whereas softer steels are tougher.
• The security features of casino chips are numerous.
• Like other small North Sea coastal resorts Hornsea has a promenade, laid out gardens, hotels, fish and chip shops, gift shops and so on.