⇄ 

Übersetzung für 'Byte' von Englisch nach Deutsch

byte <B>

Byte {n} <B>comp.unit

---

byte-oriented {adj}

byteorientiertcomp.

Werbung

byte-serial {adj}

byteseriellcomp.

byte-serial {adj} {adv}

byte-seriell [mehrere Bytes nacheinander übertragen]comp.

byte-synchronous {adj}

bytesynchroncomp.

byte-wide {adj}

bytebreitcomp.

---

argument byte

Argumentbyte {n}comp.

attribute byte

Attributbyte {n}comp.

byte address

Byteadresse {f} [auch: Byte-Adresse]comp.

byte array

Byte-Array {n}comp.

byte count

Byteanzahl {f}comp.

byte counter

Bytezähler {m}comp.

byte handling

Bytebearbeitung {f}comp.

byte length

Bytelänge {f}comp.

byte mode

Byte-Modus {m}comp.

byte multiplexing

Bytemultiplexverarbeitung {f}comp.

byte number

Bytenummer {f}comp.

byte order

Byte-Reihenfolge {f}comp.

byte track

Bytespur {f}comp.

byte-parallel

Bytes {pl} parallel [d. h. gleichzeitig übertragen]telecom.

check byte

Prüfbyte {n}comp.

command byte

Befehlsbyte {n}comp.

control byte

Steuerbyte {n}comp.

data byte

Datenbyte {n}comp.

error byte

Fehlerbyte {n}comp.

half-byte

Halbbyte {n}comp.unit

initial byte

Anfangsbyte {n}comp.

low byte

niederwertiges Byte {n}comp.

received byte

Empfangsbyte {n}comp.

status byte

Statusbyte {n}comp.

test byte

Prüfbyte {n}comp.telecom.

---

8-byte-wide {adj} [attr.]

8 Byte breit

byte-by-byte {adj} [attr.]

byteweisecomp.

---

byte order mark <BOM>

Byte Order Mark {n} <BOM>comp.

character attribute byte

Zeichenattributbyte {n}comp.

least significant byte <LSB>

niedrigstwertiges Byte {n}comp.

most significant byte <MSB>

höchstwertiges Byte {n}comp.

• Byte {n} <B> = byte <B>
• byte-seriell [mehrere Bytes nacheinander übertragen] = byte-serial
• Byte-Array {n} = byte array

• A nanoUDP message consists of a 5-byte nanoUDP header, an "n"-byte message payload and an optional 2-byte CRC checksum.
• Forward frames sent to control gear are 16 bits long, comprising an address byte followed by an opcode byte.
• The operating system uses a four byte relative track and record (TTR) for some access methods and for others an eight-byte extent-bin-cylinder-track-record block address, or MBBCCHHR, Channel programs address DASD using a six byte seek address (BBCCHH) and a five byte record identifier (CCHHR).
• Alternatively many word-oriented machines implement byte operations with instructions using special "byte pointers" in registers or memory.
• Binary lambda calculus is designed from an algorithmic information theory perspective to allow for the densest possible code with the most minimal means, featuring a 29-byte self interpreter, a 21-byte prime number sieve, and a 112-byte Brainfuck interpreter.

• However, not all protocols use big-endian byte order as the network order.
• The ISAN is a 12 byte block comprising three segments: a 6 byte root, a 2 byte episode or part, and a 4 byte version.
• There are three double-byte character codes used for Japanese with EBCDIC: KEIS from Hitachi, These are DBCS-Host encodings, using different shift codes to switch between single-byte EBCDIC and double-byte modes.
• Short branches are 2-byte instructions, and use 256-byte range, single byte address, page absolute addressing in the range 0 to 255 (hex FF).
• Extended counts, and all multi-byte values, are encoded in network (big-endian) byte order.

• The SIB byte is an optional post-opcode byte in x86 assembly, used for complex addressing.
• Recipients acknowledge such a command with a single acknowledge byte 0x00 (received correctly) or 0xff (received incorrectly).
• Below is a diagram using example 4 from above table, to illustrate how each modified data byte is located, and how it is identified as a data byte or an end of frame byte.
• The rolling hash uses a 256 byte table containing the byte last seen in each possible order-1 context.
• In addition to the ISO-2022 character sets, the following custom sets are available too. The byte designation follows the escape byte (hexadecimal 1B). There is no intermediate byte.

• FreeBSD developer Poul-Henning Kamp, writing in "ACM Queue", referred to the victory of null-terminated strings over a 2-byte (not one-byte) length as "the most expensive one-byte mistake" ever.
• Every TIFF file begins with a two-byte indicator of byte order: " [...] " for little-endian (a.k.a. ...
• Each byte range is lexicographically ordered with the following thirteen byte values excluded: [...].
• Specifically, a Poly1305-AES key is a 32-byte pair [...] of a 16-byte evaluation point [...] , as above, and a 16-byte AES key [...].