Übersetzung für 'O ring seal gasket' von Englisch nach Deutsch

O-ring (seal / gasket)

Rundschnurring {m}tech.

---

O-ring seal

O-Dichtring {m}

Rundgummidichtung {f}

Werbung

ring-a-ring-o' roses

Ringelreihen {m}games

Ringelreigen {m}games

O-seal

Runddichtung {f}

O-ring

Nullring / Null-Ring {m} [DDR-Begriff] [O-Ring]tech.

O-Ring {m}

Rundring {m} [O-Ring]tech.

Dichtungs­ring {m}

o-ring

Rundschnurring {m}

seal ring

Dichtring {m}tech.

Siegelring {m}

encapsulated O-ring

ummantelter O-Ring {m}engin.

valve O-ring

Ventil-O-Ring {m}

O-ring circuit

O-Ring-Schaltkreis {m} [auch: O-Ring-Schaltung]electr.

O-ring gripper

O-Ring-Greifer {m}tech.

flat seal ring

Flachdichtring {m}tech.

floating ring seal

Schwimmringdichtung {f}tech.

lip seal ring

Lippendichtring {m}tech.

shaft seal ring

Wellendichtring {m}tech.

• Sometimes a reference to a “seal” may be to a sealing system whereas other times the reference is to a device such as a gasket, an O-ring, compression packing, etc.
• To achieve a vacuum seal, a gasket is required. An elastomeric o-ring gasket can be made of Buna rubber, viton fluoropolymer, silicone rubber or teflon.
• In cases where the blades are removable, the container should have an O-ring or gasket between the body of the container and the base to seal the container and prevent the contents from leaking.
• A Wills Ring or Cooper Ring is a form of all-metallic O-ring seal. They are used for extremely arduous service, such as sealing the head gasket of high performance piston engines.
• The original Seamaster's key feature was an O-ring gasket used to provide its waterproof seal.

• An O-ring, also known as a packing or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, forming a seal at the interface.
• Often an o-ring or a closure liner (gasket made of pulp or foam cap liner) is used.
• e., gasket, o-ring, precision machined, and a flat valve face on the upstream and downstream sides of the valve.
• The mating surface seals to the cylinder head with a rubber O-ring style gasket.
• While a traditional caseback gasket would experience shear forces with the rotation of a screwback case used for a traditional hermetic case that would leave the gasket permanently compressed, making it unable to return to its original shape and unsuitable for reuse, the Amphibia uses a very wide sintered gasket.