Übersetzung für 'applied load' von Englisch nach Deutsch

applied load

Auflast {f}constr.tech.

---

alternating current load <AC load>

Wechselstrombelastung {f}electr.

Werbung

applied {adj} {past-p}

bezogen

angelegt [z. B. Spannung, Magnetstärke]tech.

angewandt

eingesetzt

zur Anwendung gebracht

applied {adj}

anwendungs­bezogen

anwendungs­orientiert

applied force

angewandte Kraft {f}

applied arts

angewandte Künste {pl}art

applied economics

angewandte Wirtschaftswissenschaft {f}

angewandte Volkswirtschaftspolitik {f}

angewandte Volkswirtschaftstheorie {f}econ.

angewandte Wirtschaftswissenschaften {pl}

applied economics {pl}

angewandte Volkswirtschaftslehre {f}econ.

applied science

angewandte Wissenschaft {f}acad.

applied research

angewandte Forschung {f}acad.

Zweckforschung {f}

applied arts {pl}

Kunstgewerbe {n}art

applied entomology

angewandte Entomologie {f}acad.entom.

• Internal forces (in this case at right angles to the deformation) resist the applied load.
• This is due to the very high forces that can be created by a relatively small mass during impact, compared to a statically or gradually applied load.
• This technique can be used for dimensioning of mechanical parts, determining when an applied load exceeds the strength of a structure, and in many other situations.
• Failure may occur because either the product is weaker than expected owing to a stress concentration, or the applied load is greater than expected and exceeds the normal tensile strength, shear strength or compressive strength of the product.
• In most cases the applied load is carried by pressure generated within the fluid due to the frictional viscous resistance to motion of the lubricating fluid between the surfaces.

• It is designed to resist torsion under an applied load.
• Beyond this, the load-displacement response becomes non-linear and the plastic or irreversible part of the displacement increases steadily with the applied load.
• The second type of bolted joint transfers the applied load in shear of the bolt shank and relies on the shear strength of the bolt.
• The threading, the applied load on the fastener, the stiffness of the fastener, and the number of fasteners needed should all be taken into account.
• Wöhler showed clearly that fatigue occurs by crack growth from surface defects until the product can no longer support the applied load.

• The major implication of this model is that bearing life is finite, and reduces by a cube power of the ratio between design load and applied load.
• A state of ultralow friction can also be achieved when a sharp tip slides over a flat surface and the applied load is below a certain threshold.
• During axial splitting a crack may release that tensile strain by forming a new surface parallel to the applied load.
• Lubrication mechanisms such as fluid-lubricated systems are designed so that the applied load is partially or completely carried by hydrodynamic or hydrostatic pressure, which reduces solid body interactions (and consequently friction and wear).
• In the mechanics of materials, the strength of a material is its ability to withstand an applied load without failure or plastic deformation.

• In some FWDs the magnitude of the applied load pulse is an assumed constant value determined by system design; in others the force is measured by load cells.
• and the intensity of the applied load [...] , depending on the type of surfaces that are involved in a mutual contact, and in any case, the condition is always valid such that: [...].