Übersetzung für 'back panel' von Englisch nach Deutsch

back panel

Rückplatte {f}

Rückwand {f}tech.

Gehäuserückwand {f}tech.

Schnittstellenfeld {n} [an der Rückseite des PCs]comp.

---

Werbung

back panel wiring

Rückwandverdrahtung {f}electr.

back-panel system

Übergabesystem {n}

desk back panel

Schreibtischrückwand {f}furn.

---

back-to-back {adj} [attr.] [e.g. houses]

rückseitig aneinandergrenzend [z. B. Häuser]

two / three / four back-to-back episodes {pl}

zwei / drei / vier Episoden {pl} am StückRadioTV

zwei / drei / vier Folgen {pl} am StückRadioTV

zwei / drei / vier Episoden {pl} hintereinanderRadioTV

zwei / drei / vier Folgen {pl} hintereinanderRadioTV

to be aired back-to-back

hintereinander ausgestrahlt werdenRadioTV

(two) back-to-back episodes {pl}

Doppelfolge {f} [zwei Episoden hintereinander]RadioTV

back-to-back hedge

Gegensicherung {f}

back-to-back {adj} [attr.]

einander rückseitig berührend [attr.]

sich rückseitig berührend [attr.]

back-to-back episodes

[aufeinander folgende Teile einer Fernsehserie]RadioTV

back-to-back credit

Gegenakkreditiv {n}fin.

back-to-back transaction

Gegengeschäft {n}

panel

Kommission {f}

Konsole {f}tech.

Gremium {n}

Platte {f} [groß und relativ dünn; Bauplatte, Sperrholzplatte etc.]constr.

Tafelbild {n}art

Schalttafel {f}tech.

to panel

täfeln

• In the fourth season of television series "Stranger Things", character Eddie Munson wears a denim vest that includes a large back panel of the artwork on the cover of Dio's "The Last in Line".
• Yalaltec huipils in Oaxaca are simple with decoration only on a chest and back panel with various colors and some fringe.
• ^ Note: The MultiBay Expansion Base and MultiBay-ISA Expansion Base are virtually the same, with the MultiBay-ISA Expansion Base having an ISA slot in the back panel, and a speaker assembly.
• Herbert Honeyman designed the Jacobean-style canopied pulpit: its back panel bears the arms of Scotland, Edinburgh, and the University of Edinburgh.
• Some two channel amplifiers, or stereo amplifiers, have the built in facility to operate in bridge mode by operating a switch and observing the input and output connections detailed on the back panel or in the manual.

• External hardware (tape drive, editing system, and digital delay unit) connected to the DTR through connectors on the back panel.
• A cardboard back panel is inserted into cut-out slots in the board, displays the key to the game cards and cardboard wheels that can be turned to display the correct inning, the number of outs and the score.
• To give extra fullness to the back, there are often pleats where the back panel joins to the yoke.
• The draping of the overskirt became increasingly stylized, with the back panel of the train almost entirely concealed.
• It tapers to the rear in a way that there is no traditional back panel anymore.

• The actual houses were made of perishable materials and had a steep gabled roof made of palm fronds, the back panel of which reached the ground.
• It may also accommodate the edge of the back panel of a cabinet.
• A year later, he came across another problem from hardware engineers working on the institute's next computer: minimize the amount of wire needed to connect the pins on the back panel of the machine.
• Usually, the patterns are symmetrical to a centre axis extending down the centre of the front and back panel.
• The usual selection of add-ons and peripherals available for the Model I were offered: outboard floppy drives (one or two could be plugged into a card-edge connector on the back panel), an outboard hard disk drive (LDOS was furnished as Tandy's hard drive OS vice TRSDOS), a high-resolution graphics board (resolution 512 by 192 pixels), an RS-232C serial port on an internal circuit card, and a parallel printer (connected by a card-edge connector).

• The back panel slides to reveal a hollow interior, which originally contained three-and-a-half tiny discs of silk embroidered with gold thread.
• It has a high back panel, which consists of rows of female jacks, each jack designated and wired as a local extension of the switchboard (which serves an individual subscriber) or as an incoming or outgoing trunk line.
• The back panel or flaps of the dust cover are printed with biographical information about the author, a summary of the book from the publisher (known as a blurb) or critical praise from celebrities or authorities in the book's subject area.
• Several ATX-derived designs have been specified that use the same power supply, mountings and basic back panel arrangement, but set different standards for the size of the board and number of expansion slots.
• Much of the debate about the difference in tone between the plexi- and aluminium-panel Marshall amplifiers originates from 1974 when a number of circuit changes were made to the 1959 and 1987 amplifiers; with the addition of 'mkII' added to the 'Super Lead' name on the back panel and 'JMP' ("Jim Marshall Products") added to the left of the power switch on the front panel.