Übersetzung für 'blind holes' von Englisch nach Deutsch

blind holes

Sacklöcher {pl}tech.

---

tapped blind holes

Gewindesacklöcher {pl}tech.

---

Werbung

holes

Löcher {pl}

to mispunch (holes)

fehllochen

mouse holes

Mäuselöcher {pl}

Mauselöcher {pl}

worm holes

Wurmstiche {pl}

to drill holes

Bohrungen anbringen

breathing holes

Atemlöcher {pl}

(kettle) holes

Sölle {pl} [runde Seen eiszeitlicher Herkunft]geol.

moth holes

Schabenlöcher {pl} [südd.] [schweiz.] [Mottenfraß]cloth.entom.

spoke holes

Speichenlöcher {pl}

to gouge holes

Löcher bohren

bullet holes

Einschusslöcher {pl}

mounting holes

Befestigungs­löcher {pl}tech.

distance between holes

Lochabstand {m}

for boring holes {adv}

zum Bohren von Löchern

to dig dry holes

Wasser ins Meer tragen [ugs.]idiom

all-codes holes {pl}

Volllochung {f} [Irrungs­zeichen bei Lochstreifen]telecom.

riddled with holes {adj}

durchlöchert

rail with holes

Lochlineal {n}

Euro-standard holes {pl}

Eurolochung {f}comm.

• They are known for manufacturing drill bits that can drill square holes, including blind holes, which cannot be made with other methods such as broaching.
• Single-pass bore finishing is not well suited for blind holes because the tool has a tapered lead on it which prevents the bottom of the hole from being finished.
• Compared to the electrolytic process, a major advantage of electroless nickel plating is that it creates an even coating of a desired thickness and volume, even in parts with complex shape, recesses, and blind holes.
• The boring bar may be supported on both ends (which only works if the existing hole is a through hole), or it may be supported at one end (which works for both, through holes and blind holes).
• When two pieces of wood are to be joined by dowels embedded in blind holes, there are numerous methods for aligning the holes.

• tool manufacturers have manufactured tools for thread milling in blind holes: Ingersoll Cutting Tools of Rockford, Illinois, and Tooling Systems of Houston, Texas, who introduced the Thread Mill in 1977, a device that milled large internal threads in the blind holes of oil well blowout preventers.
• Through holes are easier to produce than blind holes which don't go through the entire part.
• The biggest disadvantage of core drill or annular cutter is that it can not drill blind holes.
• Drive screws, possibly another name for drive rivets, are commonly used to hold nameplates into blind holes.
• This made it easy to turn and thread directly against an endstop, even into blind holes.

• However, hex sockets are available for higher torquing ability, which is especially useful for eccentric cam followers and those used in blind holes.