Übersetzung für 'burst pressure' von Englisch nach Deutsch

burst pressure

Platzdruck {m}tech.

Berstdruck {m}tech.

---

Werbung

pulmonal artery pressure <PAP, PA pressure>

Pulmonalarteriendruck {m}med.

burst

Bruch {m}

Bruch {m} [Berstvorgang, Riss]

Burst {m}electr.spec.

Stoß {m}

Häufung {f}engin.

Explosion {f}

Platzer {m}

to burst

explodieren

platzen

zerbersten

zerplatzen

brechen

auseinanderbrechen

bersten [geh.]

burst {adj} {past-p}

geborsten

geplatzt

zerborsten

zersprungen

burst {past-p}

zerplatzt

• The burst pressure for the tri-dimensional burst disk used in the Scott is 4800 psi.
• , though the pipe sealing method can significantly reduce the burst pressure.
• A premature increase in pressure is sign of a potential blockage and continuing to pump risks burst pressure retaining components.
• The burst pressure of this casing is 5020 psi. 1.2 sg brine produces a pressure gradient of 0.52 psi.ft−1 (see Well kill for the mathematical basics of hydrostatic heads).
• The thickness of the raw material employed and the diameter of the disk determines the burst pressure.

• However, it can be limited by the burst-pressure capabilities of the tubing or casing, and can risk damaging the reservoir by forcing undesired materials into it.
• Thus, any explosion would be caused by the pressure surpassing the burst pressure of the container (rocket motor).
• Due to both the high energy operating costs of turbulent flow and the limiting burst pressure, tubular modules are more suited to 'dirty' applications where feeds have particulates such as filtering raw water to gain potable water in the Fyne process.
• In this way, the effective area of metal loss can be calculated and used in acknowledged formulas to predict the estimated burst pressure of the pipe due to the detected anomaly.
• Pipe of differing strengths often comprises a long casing string, which typically will have the greatest axial tension and perhaps highest internal burst pressure differentials in the upper parts, and the greatest collapsing loads deeper in the well from external pressure vs lowered internal pressure.

• The results for the burst test include the burst pressure data and a description of where the seal failure occurred.
• Polyimide is used for medical tubing, e.g. vascular catheters, for its burst pressure resistance combined with flexibility and chemical resistance.
• The permissible operating pressures for hoses with small dimensions reach 380 bar (with a 3-fold burst pressure safety factor).
• This also allows some manufacturers to provide secondary pressure containment as an extra precaution for pressure equipment safety if the burst pressure of the primary pressure sensing diaphragm is exceeded.