Übersetzung für 'car bodies' von Englisch nach Deutsch

car bodies

Karosserien {pl}

---

radio-controlled car <R/C car>

funkferngesteuertes Modellauto {n}toys

Werbung

bodies

Körper {pl}

Leiber {pl}

Gremien {pl}

small bodies

Kleinkörper {pl}astron.

professional bodies

Berufsverbände {pl}

human bodies

Korpusse {pl} [ugs., hum.: menschliche Körper]

Menschenleiber {pl} [veraltet; sonst: poet.]

subsidiary bodies

nachgeordnete Stellen {pl}admin.

Hilfsorgane {pl} [Hilfe gewährende Einrichtungen]

standards bodies

Standardisierungs­gremien {pl}

supranational bodies

übernationale Behörden {pl}

Auer bodies

Auerstäbchen {pl}med.

animal bodies

Tierkörper {pl}

ketone bodies

Ketonkörper {pl}biol.

deciding bodies

Entscheidungs­gremien {pl}

celestial bodies

Himmelskörper {pl}astron.

measurement bodies

Messkörper {pl}tech.

dead bodies

Leichen {pl}

public bodies

Körperschaften {pl} des öffentlichen Rechtsadmin.

• The solution to increasing speeds further is therefore having the train car bodies tilt as well – while this doesn't influence the forces acting at the wheel-rail level, it keeps the lateral forces experienced inside the passenger compartment at a comfortable level even at further increased speeds.
• They used six engines and five (and a half) car bodies, of which the "specialist" three were obsolescent, the rest very closely related if not identical.
• In 1916, the Society of Automobile Engineers suggested nomenclature for car bodies that included the following: compared with the smaller rear-seat area in a 2+2 body style.
• Its first main civilian application was for the building of boats and sports car bodies, where it gained acceptance in the 1950s.
• Regarding the future of the French automobile industry, Grégoire held strong opinions, two of which favoured front-wheel drive and aluminium as a material for car bodies.

• Its early work on mathematical curve modeling for car bodies is important in the history of computer graphics.
• Commercial car bodies are almost never true monocoques but instead use the unibody system (also referred to as unitary construction, unitary body–chassis or body–frame integral construction), which uses box sections, bulkheads and tubes to provide most of the strength of the vehicle, while the skin adds relatively little strength or stiffness.
• Kurtis was born in Crested Butte, Colorado. He began working with fabrication when he was hired by Willet Brown and Tom Lee to rework Don Lee Racing Team's midget car bodies.
• Semi-monocoque construction is used for, among other things, aircraft fuselages, car bodies and motorcycle frames.
• Thus the name "landau", like many other automobile terms, originates from coachbuilding (since coachbuilders began making motor car bodies instead, and because customers were familiar with coachbuilding terms).

• In the world there are many car bodies. They vary depending on intended use, market position, location, and the era they were made in.
• Dipping used to be the norm for objects such as filing cabinets, but this has been replaced by high-speed air turbine-driven bells with electrostatic spray. Car bodies are primed using cathodic elephoretic primer, which is applied by charging the body depositing a layer of primer.
• The vinyl can also be applied to car bodies and windows for large, bright company advertising and to sailboat transoms.
• During this time of joint operation, American Flyer supplied Ives with car bodies and other parts.
• MacPherson struts are often purchased by the automakers in sets of four completed sub-assemblies: These can be mounted on the car bodies as part of the manufacturers' own assembly operations.

• Brookville Roadster was one of the first companies to reproduce car bodies in steel.
• NURBS is a mathematically exact representation of freeform surfaces like those used for car bodies and ship hulls, which can be exactly reproduced at any resolution whenever needed.
• That year, Searle split Midland Light Car Bodies from Rover in an effort to save money and instructed Robert Boyle and Maurice Wilks to design a new small car.
• In the late 1940s, he went to work for Frank Kurtis building racing car bodies; this led to a lifelong career in the racing business.