Übersetzung für 'casing bottom' von Englisch nach Deutsch

casing bottom

Gehäuseboden {m}

---

casing

Gehäuse {n}

Schalung {f}

Verschalung {f}

Futterrohr {n} [Erdöl]ind.mining

Einschalen {n}

Verkleidung {f}

Wursthülle {f}FoodInd.

Überzug {m}

Werbung

sausage casing

Wurstpelle {f} [nordd.]gastr.

Wursthaut {f}gastr.

Wurstdarm {m}gastr.

socket casing

Steckdosengehäuse {n}electr.

outer casing

Abdeckhaube {f} [Maschine]tech.

casing spool

Rohrdoppelflansch {m}tech.

motor casing

Motormantel {m}

worm casing

Schneckengehäuse {n}tech.

protection casing

Schutzgehäuse {n}

filter casing

Filtergehäuse {n}tech.

steel casing

Blechverschalung {f}

casing exhaust

Gehäuseentlüftung {f}

• As the handwheel is cranked, the barrels rotate and each barrel sequentially loads a single cartridge from a top-mounted magazine, fires off the shot when it reaches a set position (usually at 4 o'clock), then ejects the spent casing out of the left side at the bottom, after which the barrel is empty and allowed to cool until rotated back to the top position and gravity-fed another new round.
• The primary purpose of a wellhead is to provide the suspension point and pressure seals for the casing strings that run from the bottom of the hole sections to the surface pressure control equipment.
• In order to reduce cost, a liner may be used which extends just above the shoe (bottom) of the previous casing interval and hung off downhole rather than at the surface.
• If shut in on a kick, bottom hole pressure is equal to the hydrostatic pressure in the annulus plus the casing (wellhead or surface pressure) pressure.
• This is because the heat inside the turbine casing tends to concentrate in the top half of the casing, making the top half portion of the shaft hotter than the bottom half.

• The chamber of the integral instrument is generally at the front of the case facing downwards, and for beta/gamma instruments there is a window in the bottom of the casing.
• Various steps were taken to strengthen the tower, including fitting a casing around the bottom section up to the second floor and filling it with stone, and the surrounding rock smoothed over.
• They are located on the leading edge of the sail, on the outer hull casing in front of the sail and on the bottom of the hull forward of the sail.
• Reservoir fluid enters from the formation into the bottom of the borehole through perforations that have been made through the casing and cement (the casing is a larger metal pipe that runs the length of the well, which has cement placed between it and the earth; the tubing, pump, and sucker rod are all inside the casing).
• A production liner is a string of casing set across a production interval but does not extend all the way back the surface.

• A tube ice generator is an ice generator in which the water is frozen in tubes that are extended vertically within a surrounding casing—the freezing chamber.
• Some of the modern drillships have larger derricks that allow dual activity operations, for example, simultaneous drilling and casing handling.
• At the northwest corner of the pyramid, the bedrock was fashioned into steps. Casing stones cover the top third of the pyramid, but the pyramidion and part of the apex are missing.
• If fuzed with the T-72 clear plastic-cased blast resistant fuze, pressure on the top of the fuze will depress the casing which will revolve due to the depression of the spring which is attached to the casing.
• The casing is pressed aluminium with a hinged cover.

• The wells are typically built out of PVC casing which is slotted to allow groundwater to flow freely through the well.