Übersetzung für 'clamped' von Englisch nach Deutsch

clamped {adj} {past-p} [fastened]

befestigt [festgeklemmt]

clamped {adj} {past-p}

eingespanntengin.tech.

gespannttech.

---

Werbung

clamped connection

Klemmverbindung {f}tech.

clamped fin

Flossenklemme {f}

• Appliances such as shooting boards, bench hooks and mitre boxes include static fences that the workpiece is held or clamped to.
• Adidas explored an alternative to the Nordic Norm binding in 1975 with a tab protruding from the boot that was clamped down in a narrow plastic binding.
• If necessary, clamped joints can be disassembled later, and the fittings and pipe may be reconfigured.
• The blade is usually clamped into position using a pair of wingnuts.
• The flat gripping edges of the frame, generally no larger than half an inch or a centimeter (depending on the size of the clamp) can cause indentations and marring of the surfaces being clamped.

• Bogie performance detectors most often use optical methods, and are installed adjacent to the track with wheel sensors clamped to the rails.
• Rashtriya Swayamsevak Sangh, which was seen close to opposition leaders, was also banned. Police clamped down on the organisation and thousands of its workers were imprisoned.
• (1) The tissue is clamped.
• In the friction joint, the elements are clamped together with enough force that the resultant friction between the clamped surfaces prevents them from slipping laterally over each other.
• The device comprised a small upper body with wings and tail, clamped on top of an air-launched torpedo.

• The tube clamping device is a metallic device which is clamped on the tube with an adjustable chain.
• The billet is clamped with gripper tongs which slide on ways and are operated by a ball screw- servo motor combination.
• In a refinement of the diode-clamped converter, the so-called "active neutral-point clamped" converter, the clamping diode valves are replaced by IGBT valves, giving additional controllability.
• As the volume of the finger artery is clamped on a constant diameter, the method is also known as “Volume Clamped Method”.
• The original standard diving equipment was a copper helmet or "bonnet" (British English) clamped onto a copper breastplate or "corselet", which transferred the weight to the diver's shoulders.

• The lack of a simple, generalizable, space-clamped, parabolic bursting model motivated Ermentrout and Kopell to develop the theta model.
• If the result of an operation is greater than the maximum, it is set ("clamped") to the maximum; if it is below the minimum, it is clamped to the minimum.