Übersetzung für 'cooling loop' von Englisch nach Deutsch

cooling loop

Kühlkreislauf {m} [System]

---

omega loop <Ω loop>

Omega-Schleife {f} <Ω-Schleife>spec.

Werbung

loop

Loop {f}math.

Aufhänger {m} [Schlaufe, z. B. an Jacke etc.]cloth.

Ringleitung {f}hydro.tech.

Schlaufe {f}

Programmschleife {f}comp.

Looping {m} [auch {n}]aviat.

Schlinge {f}

Meßschleife {f} [alt]

to loop

zur Schleife schaltenelectr.

in eine Schleife legen

in Schleifen legen

eine Schleife machen

schlingen

sich schlingen

ground loop

Ringelpiez {m}aviat.

continuous loop

Dauerschleife {f}

outside loop

Außenlooping {m}aviat.

loop hole

Schießscharte {f}archi.hist.mil.

arrow loop

Schießscharte {f}archi.hist.mil.

• Their liquid salt coolant allows higher operating temperature and much lower pressure in the primary cooling loop.
• Active heat transfer was achieved by means of a freon cooling loop which dissipated the thermal load through two radiators into space.
• In the early hours of 1 August 2010, a failure in cooling Loop A (starboard side), one of two external cooling loops, left the station with only half of its normal cooling capacity and zero redundancy in some systems.
• In contrast, sodium forms the potent gamma emitter sodium-24 (half-life 15 hours) following intense neutron radiation, requiring a large radiation shield for the primary cooling loop.
• The motor oil flows through a heat exchanger, where the heat is passed to a central engine room cooling loop, before the heat is rejected to the ocean.

• Once the ATA was installed, the tank was integrated into the cooling loop.
• Daya Bay has two 944 MWe PWR nuclear reactors based on the Framatome ANP French 900 MWe three cooling loop design (M310), were both commissioned in 1993 and started commercial operation in 1993 and 1994 respectively.
• The steam is condensed in the heat exchangers and the denser condensate then flows back down to the reactor to complete the cooling loop.
• Where the CANDU design differs from most other designs is in the details of the fissile core and the primary cooling loop.
• In contrast, the well-established pressurized water reactors (PWR) have a primary cooling loop of liquid water at a subcritical pressure, transporting heat from the reactor core to a secondary cooling loop, where the steam for driving the turbines is produced in a boiler (called the steam generator).

• For this reason the primary cooling loop is within a containment vessel.
• Additionally, the reflector and moderator blocks were cooled with a liquid sodium metal cooling loop, which also transferred heat to helium and then water.
• SABRE inserts a helium cooling loop between the air and the cold fuel to avoid problems with hydrogen embrittlement in the precooler.
• The key requirement is to provide a system that condenses the steam back into liquid before passing it back into the pumps and completing the cooling loop.
• This caused contamination of the primary cooling loop with plutonium and other fission products.

• The major disadvantage to porous reactor fuel is that the entire primary cooling loop including all the pumps, compressors and heat exchangers would become highly contaminated with fission products.