Übersetzung für 'inflation pressure' von Englisch nach Deutsch

inflation pressure

Luftdruck {m}

Inflationsdruck {m}econ.

Werbung

inflation pressure [tyres]

Befülldruck {m}

---

cold inflation pressure

kalter Luftdruck {m}tech.

inflation pressure gauge

Luftdruckprüfer {m}

specified inflation pressure [tyre]

vorgeschriebener Luftdruck {m} [Reifen]

tire (inflation) pressure [Am.]

Reifenluftdruck {m}automot.

tyre inflation pressure [Br.]

Reifenluftdruck {m}automot.

---

adjustment of inflation pressure

Einstellen {n} des Luftdrucks

maximum permissible inflation pressure

maximal zulässiger Luftdruck {m}

---

pulmonal artery pressure <PAP, PA pressure>

Pulmonalarteriendruck {m}med.

inflation

Preissteigerung {f}econ.

Geldentwertung {f}econ.

Teuerung {f}econ.

Aufblähung {f}

Inflation {f}econ.

Inflationierung {f}

inflation pressures {pl}

Inflationsdruck {m}econ.

inflation peril

Inflationsgefahr {f}econ.

pay inflation

Lohninflation {f}econ.

inflation report

Inflationsbericht {m}econ.

inflation-adjusted {adj}

inflationsbereinigtecon.

inflation level

Inflationsniveau {n}econ.

to halt inflation

die Inflation stoppenecon.

core inflation

Kerninflation {f}fin.

inflation risks

Inflationsrisiken {pl}econ.

demand inflation

Nachfrageinflation {f}

inflation gain

Inflationsgewinn {m}

inflation risk

Inflationsrisiko {n}

inflation table

Luftdrucktabelle {f}

• A blowout (also known as a burst) is a rapid, explosive loss of inflation pressure of a pneumatic tire.
• The ground pressure for a pneumatic tire is roughly equal to its inflation pressure.
• If for some reason (incorrect inflation pressure, worn tread) the tyres on one axle are incapable of generating significant lateral force, the stability will obviously be affected.
• In 2018, a field study on TPMS and tire inflation pressure was published on the UN ECE Working Party on Brakes and Running Gear (GRRF) homepage.
• The exact ratio of sidewall compliance to tread compliance is a factor in tire construction and inflation pressure.

• The standard notes that the minimum inflation pressure recommended is 300 kPa for narrow tires (25 mm section width or less), 200 kPa for other sizes in normal highway service, and 150 kPa for off-the-road service.
• All else being equal, such as tire width, rim width, inflation pressure and rider weight, the contact patch of a 29" wheel has the same area and is slightly longer (~5%) than that of a 26" wheel.
• Firestone argued that vehicle weight, tire design, low recommended inflation pressure, and lower tire adhesion for tires manufactured at the Decatur factory contributed to the tire failures.
• For example, a 10% change in load or inflation pressure usually does not result in a 10% change in the contact patch area because the load or pressure on a tire can be altered freely, and the contact patch area is affected by the tire geometry and stiffness.
• For this reason, most modern crewed spacecraft use conventional air (nitrogen/oxygen) atmospheres and use pure oxygen only in pressure suits during extravehicular activity where acceptable suit flexibility mandates the lowest inflation pressure possible.

• The heavy-duty tyres are designed to be puncture-resistant and are filled with nitrogen to maintain proper inflation pressure longer.
• Camber thrust is approximately linearly proportional to camber angle for small angles, Camber stiffness is a parameter used to describe the camber thrust generated by a tire and it is influenced by inflation pressure and normal load.
• All new model year 2008 light vehicles shall have a TPMS (direct or indirect) fitted which is capable of detecting when one or more of the vehicle's tires, up to all four tires, is 25% or more below the manufacturer's recommended inflation pressure (placard pressure) or a minimum activation pressure specified in the standard, whichever is higher.
• For load range "B" tires, ETRTO (ISO-Metric) standards specify the load index rating at an inflation pressure of [...] (table below), while P-Metric standards measure the load capacity at an inflation pressure of [...].