Übersetzung für 'non cutting' von Englisch nach Deutsch

non-cutting {adj}

spanlostech.

nicht spanendtech.

nicht spanabhebendtech.

Werbung

non-cutting {adj} <NC>

nicht schneidend

---

non-cutting shaping

spanlose Umformung {f}

non-cutting time

Totzeit {f} [Drehmaschine]

---

non-end cutting fissure burr

Fissurenbohrer {m} mit glatter Stirndent.

---

non-investigational medicinal products <NIMPs, non-IMPs>

Nicht-Prüfpräparate {pl}EUpharm.QM

non-combustible and non-conductive cushioning material

nicht brennbares und nicht leitendes Polstermaterial {n}transp.

non-investigational medicinal product <NIMP, non-IMP>

Nicht-Prüfpräparat {n}EUpharm.QM

cutting

Verkürzung {f}

Aufschneiden {n}

Schnitt {m}film

Steckling {m}hort.

Zerteilen {n}

Kürzung {f}

Zuschnitt {m} [Zuschneiden]textil.

Kürzen {n}

Abgrabung {f}

Fräsen {n}tech.

Verschneiden {n}

Zeitungs­ausschnitt {m}

Ableger {m} [Steckling]hort.

Schneiden {n}

cutting {adj}

mähend

spanabhebendtech.

beißend

• The ram is adjustable for stroke and, due to the geometry of the linkage, it moves faster on the return (non-cutting) stroke than on the forward, cutting stroke.
• The parashu could be double-edge bladed or single-edge bladed with a spike on the non cutting edge.
• The arched, non-cutting top of the blade is called the "back" or the "spine" while the cutting part of the blade opposite the back is called the "cutting edge".
• In practice the rate of cut is slightly less than the ideal rate so that the load is released on the non-cutting edge of the tool.
• This is done by rolling the back (non cutting edge) of the saw.

• The coat must be stripped by hand or a non-cutting knife to retain its weather-resistant qualities.
• In 1943 Gruner was appointed as lecturer in the field of "non-cutting shaping of sheet metal" at the Braunschweig University of Technology, an appointment to the RWTH Aachen University in late 1944 was hindered by the advance of the Western Allies.
• Two or more operations such as forming, drawing, extruding, embossing may be combined on the component with various cutting operations like blanking, piercing, broaching and cut off takes place- it can perform a cutting and non cutting operations in a single tool.
• The non-cutting side of the blade is "behind" the cutting edge, so limits the "depth" of the cuts that may be made.
• Changing the bearing, in effect, changes the diameter of the cutting edge.

• tooth space on the cutting edge and "sliver teeth" on the back.