Übersetzung für 'received signal' von Englisch nach Deutsch

received signal

Empfangssignal {n}

empfangenes Signal {n}

---

received signal quality

Empfangsqualität {f}electr.telecom.

---

Werbung

blanking and sync signal <BAS signal>

Austast- und Synchronisiersignal {n}electr.RadioTV

video, blanking, and sync signal <VBS, VBS signal>

Bild-Austast-Synchron-Signal {n} <BAS, BAS-Signal>electr.RadioTV

received {adj} {past-p}

eingenommenfin.

entgegengenommen

eingegangen [Briefe, Zahlungen etc.]

empfangen

moneys received

eingenommene Gelder {pl}

received opinion

Schulmeinung {f}

to be received

empfangen werden

received message

empfangene Nachricht {f}

documents received

erhaltene Dokumente {pl}

received word

empfangenes Wort {n}

received bit

Empfangsbit {n}

received byte

Empfangsbyte {n}comp.

received data

Empfangsdaten {pl}

amounts received

erhaltene Beträge {pl}

telegram received

eingegangenes Telegramm {n}

payments received

Zahlungs­eingänge {pl}

amount received {past-p}

Betrag erhalten

received pronunciation

anerkannte Aussprache {f}

• Although "Doppler" has become synonymous with "velocity measurement" in medical imaging, in many cases it is not the frequency shift (Doppler shift) of the received signal that is measured, but the phase shift ("when" the received signal arrives).
• The received signal is amplified and retransmitted, often on another frequency, to provide coverage beyond the obstruction.
• By correlating a (delayed version of) the transmitted signal with the received signal, a precise round trip time to the remote location can be determined and thus the distance.
• The demodulator, which is designed specifically for the symbol-set used by the modulator, determines the phase of the received signal and maps it back to the symbol it represents, thus recovering the original data.
• The first type separates the different frequency components that are present in the received signal into multiple frequency bins (using either a Discrete Fourier transform (DFT) or a filterbank).

• Multipath waves combine at the receiver antenna, resulting in a received signal that may vary widely, depending on the distribution of the intensity and relative propagation time of the waves and bandwidth of the transmitted signal.
• If a received signal is too strong a temporary fix is to wrap the cable around a pencil until the desired level of attenuation is achieved.
• Line coding should make it possible for the receiver to synchronize itself to the phase of the received signal.
• When done properly this produces a received signal which more closely resembles the original or desired signal, allowing the use of higher frequencies or producing fewer bit errors.
• An example of a disturbance voltage is a voltage that produces (a) false signals in a telephone, (b) Noise (radio) in a radio receiver, or (c) distortion in a received signal.

• In telecommunication, distortion-limited operation is the condition prevailing when distortion of a received signal, rather than its attenuated amplitude (or power), limits performance under stated operational conditions and limits.
• A superheterodyne receiver, often shortened to superhet, is a type of radio receiver that uses frequency mixing to convert a received signal to a fixed intermediate frequency (IF) which can be more conveniently processed than the original carrier frequency.
• Due to the low received signal strength of satellite transmissions, they are prone to jamming by land-based transmitters.
• Since the signal takes a finite time to travel to and from the target, the received signal is a different frequency than what the transmitter is broadcasting at the time the reflected signal arrives back at the radar.
• Also note that there exist many other different generalizations/forms of OFDM, to see their essential differences, it is critical to see their corresponding received signal equations to demodulate.

• that is, the received signal is amplified by mixing with the local oscillator [...].
• Reusing the same frequency in every cell eliminates the need for frequency planning in a CDMA system; however, planning of the different pseudo-random sequences must be done to ensure that the received signal from one cell does not correlate with the signal from a nearby cell.