Übersetzung für 'spline shaft' von Englisch nach Deutsch

spline shaft

Keilwelle {f}

Keilnabe {f}tech.

---

spline shaft profile

Keilwellenprofil {n}tech.

Werbung

spline shaft section

Keilwellenabschnitt {m}tech.

---

spline

Kerbverzahnung {f}

Straklatte {f}constr.naut.

spline profile

Keilprofil {n}tech.

spline hub

Keilnabe {f}tech.

spline end

Schiebestück {n}

spline function

Splinefunktion {f}math.

spline curve

Spline-Kurve {f}math.

cubic spline (function)

kubischer Spline {m}math.

kubische Splinefunktion {f}math.

multiple spline hub

Vielkeilnabe {f}tech.

shaft

Stiel {m}

Säulenschaft {m}archi.

Rumpf {m} [z. B. einer Säule]constr.

Schacht {m}

Spindel {f}

Achse {f}

Deichsel {f}automot.

Schaft {m}

Welle {f}tech.

knife shaft

Messerwelle {f}tech.

• A Hirth joint is similar to a spline joint but with the teeth on the end of the shaft instead of on the surface.
• 788-inch 24-spline input shaft, which was upgraded in 1970 to 26-spline and .839-inch.
• A variant of the THM400 known as a THM375 is a THM400 with a mid length 27 spline output shaft that mates to the smaller THM350 27 spline drive shaft yoke.
• The AX15 had a 23 spline output shaft and a mated to the NP231 as well as the NP207 transfercase.
• Engineers developed a two-part shaft connected by a spline that allows the system to flex under load mimicking the feel and performance benefits of a traditional chain drive.

• Some engines instead used a final pinion on a helical spline, similar to that later used for the starters of internal combustion engines: once the main engine started, the pinion would be thrown out of engagement axially along this spline as the flywheel over-speeded the pinion relative to the shaft.
• Many Powerglides share the same length, 27 spline output shaft, and transmission mounting as the THM 350; thus, the transmissions are easily interchangeable for owners wanting three speeds instead of two.
• Splines are used in several places in bicycles. The crank arm to BB shaft interfaces that are splined include ISIS Drive, Truvativ GXP and Howitzer, Shimano's Octalink and many others, most of which are proprietary.
• Ball splines (Ball Spline bearings) are a special type of linear motion bearing that are used to provide nearly frictionless linear motion while allowing the member to transmit torque simultaneously.
• All transfer cases were available with inputs matching either 21- or 23-spline shafts, making transmission swaps possible among various models and years.

• A 10-spline type was used with some early equipment such as the 1948 Land Rover.
• The flex spline is shaped like a shallow cup. The sides of the spline are very thin, but the bottom is relatively rigid.