Translation for 'moisture' from English to Latin

full of moisture

uliginosus {adj}

• Moisture Content -- BS 1088 plywood must have a moisture content between 6% and 14% when it leaves the factory.
• Throughout the process, it is necessary to keep close control of the moisture content using a moisture meter system in order to reduce over-drying and allow operators to know when to pull the charge.
• For semiconductor packaging, HICs are packed inside a moisture-sensitive bag, along with the desiccant, to aid in determining the level of moisture to which the moisture-sensitive devices have been subjected.
• In cooking, syneresis is the sudden release of moisture contained within protein molecules, usually caused by excessive heat, which over-hardens the protective shell.
• Two primary methods exist to measure the moisture content of wood: oven-dry testing and use of an electronic moisture meter.

• Moisture sensitive devices are packaged in a moisture barrier antistatic bag with a desiccant and a moisture indicator card which is sealed.
• To check hay moisture content, the farmer can use a hand, an oven or a moisture tester. The most efficient way is to use a moisture tester which shows the moisture content in a few seconds.
• The moisture wicking or moisture management test is for testing moisture management properties such as wicking capabilities and drying efficiencies.
• "Wagashi" are classified according to the production method and moisture content. Moisture content is very important, since it affects shelf life.
• Ustic is a class of soil moisture regime. It is one of a range of different soil moisture regimes, such as: aquic moisture regime, aridic moisture regime, udic moisture regime and xeric moisture regime.

• Further, microbial activity of the food materials favor with the moisture availability in the food.
• % of moisture content in the paper is known as relative moisture content.
• Moisture migration of gummy candies can be prevented by storing candies in conditions where the surrounding environment is equal to their own moisture content.
• PET must be dried to <100 parts per million (ppm) moisture and maintained at this moisture level to minimize hydrolysis during melt processing.