Translation for 'high-temperature' from English to Russian

high-temperature superconductor <HTSC>

высокотемпературный сверхпроводник {м}электр.

• Different types of bitumen have been used: blown bitumen (partly oxidized with air oxygen at high temperature after distillation, and harder) and direct distillation bitumen (softer).
• Approximately 20% of acetylene is supplied by the industrial gases industry for oxyacetylene gas welding and cutting due to the high temperature of the flame.
• Discovery of superconducting materials with critical temperatures significantly above the boiling point of nitrogen has provided new interest in reliable, low cost methods of producing high temperature cryogenic refrigeration.
• Thus a relatively low temperature emits a dull red and a high temperature emits the almost white of the traditional incandescent light bulb.
• These channel stops are produced before the polysilicon gates are, as the LOCOS process utilizes a high-temperature step that would destroy the gate material.

• Under some conditions, such as extremely low temperature, some ceramics exhibit high-temperature superconductivity.
• This occurs when two surfaces converge rapidly and obliquely at a small angle, and high-temperature highly shocked material is expelled from the convergence zone with velocities that may be several times larger than the impact velocity.
• A plasma can be formed by high temperature, or by application of a high electric or alternating magnetic field as noted above.
• In the past, when high pressure high temperature (HPHT) techniques were used to produce a diamond, the result was typically very small free-standing diamonds of varying sizes.
• Caesium metal has also been considered as the working fluid in high-temperature Rankine cycle turboelectric generators.

• An internal abscess is more difficult to identify, but signs include pain in the affected area, a high temperature, and generally feeling unwell.
• It is a component of YBCO (high-temperature superconductors) and electroceramics, and is added to steel and cast iron to reduce the size of carbon grains within the microstructure.
• Southeast Alaska is also the only region in Alaska where the average daytime high temperature is above freezing during the winter months, except for in the southern parts of the Aleutian islands such as Unalaska.
• However the most important distinction is between thermal coal (also known as steam coal), which is burnt to generate electricity via steam; and metallurgical coal (also known as coking coal), which is burnt at high temperature to make steel.
• The total baryonic mass is about 10% of the mass of the galaxy; the remainder of the mass is an unknown dark matter. High temperature inside stars makes most "atoms" fully ionized, that is, separates "all" electrons from the nuclei.

• Argon is mostly used as an inert shielding gas in welding and other high-temperature industrial processes where ordinarily unreactive substances become reactive; for example, an argon atmosphere is used in graphite electric furnaces to prevent the graphite from burning.
• The hottest month is March with an average high temperature of [...] , while the coolest month is September with an average low temperature of [...].
• This typically consists of stages, such as drying – the solvent is evaporated; pyrolysis – the majority of the matrix constituents are removed; atomization – the analyte element is released to the gaseous phase; and cleaning – eventual residues in the graphite tube are removed at high temperature.