Translation for 'printed circuit board' from English to Russian

printed circuit board

печатная плата {ж}тех.

---

circuit board

печатная плата {ж}электр.

Advertisement

printed

unverified печатный {adj}

printed matter

печатное издание {с}

circuit

цепь {ж} токаэлектр.

circuit breaker

пробка {ж} [разг.] [автоматический предохранитель]

(автоматический) предохранитель {м}

автоматический выключатель {м}

electric circuit

электрическая цепь {ж}тех.

board

доска {ж}

drawing board

кульман {м}спец.

cutting board

разделочная доска {ж}гастр.

asbestos board

асбестовый картон {м}архит.строит.

pivoting board

откидной борт {м}транс.

ouija board

доска {ж} уиджаэзот.

room and board

питание и проживание {noun}

board and lodging

питание и проживание {noun}

full board [Br.]

полный пансион {м}

• The pattern consists of two D-shaped capacitor pads for each switch, printed on a printed circuit board (PCB) and covered by a thin, insulating film of soldermask which acts as a dielectric.
• The game was distributed as a standard printed circuit board in North America and Europe under the title of "Nemesis".
• Eurocard is a European standard format for printed circuit board (PCB) cards that can be plugged together into a standard chassis which, in turn, can be mounted in a 19-inch rack.
• This chip carrier is then soldered onto, or inserted into a socket on, a printed circuit board (PCB).
• The method eliminates the design and fabrication of a printed circuit board.

• ... to be soldered onto a printed circuit board with a connector mounted to the housing).
• Microstrip can be made by having a strip of copper on one side of a printed circuit board (PCB) or ceramic substrate while the other side is a continuous ground plane.
• It can also be used to locate discontinuities in a connector, printed circuit board, or any other electrical path.
• Despite the name, most smartjacks are much more than a simple telephone jack. One common form for a smartjack is a printed circuit board with a face plate on one edge, mounted in an enclosure.
• A "ground plane" on a printed circuit board (PCB) is a large area or layer of copper foil connected to the circuit's ground point, usually one terminal of the power supply.

• Loss of printed circuit board traces and cables increases with frequency due to dielectric loss, which causes the channel to behave as a low-pass filter.
• Often it consists of instructions on how to draw the transistors and wires on an integrated circuit or a printed circuit board.
• A diode intended to protect the system from transient voltages was thought to have been damaged during repairs/installation of the pitch amplifier's printed circuit board, something that would not have been detected through bench tests.
• The product used a single printed-circuit board with four custom ASICs.
• It went on to become Japan's second highest-grossing arcade printed circuit board (PCB) software of 1995, below "Virtua Fighter 2".

• This module was a printed circuit board (PCB) with the CPU directly attached to it in a smaller form factor.
• The best DMMs use gold plated contacts in their switches; less expensive meters use nickel plating or none at all, relying on printed circuit board solder traces for the contacts.
• It is used as a backbone to connect several printed circuit boards together to make up a complete computer system.