Translation for 'rocker' from English to Russian

rocker

рокер {м}муз.

• How the roller and rocker interface can vary. Rollers may have grooves to fit a guide on the board to keep the roller aligned with the rocker and prevent the rocker from sliding along the roller.
• Rocker covers are covers that are bolted on over rocker arms in an internal combustion engine.
• The 1622's controls were divided into three groups: 3 punch control rocker switches, 6 buttons, and 2 reader control rocker switches.
• Pontiac engineer Clayton Leach designed the stamped steel valvetrain rocker arm, a simplified and reliable alternative to a bearing-equipped rocker.
• In a single overhead camshaft (SOHC) engine, the tappets are integrated into the design of the rocker arms as one piece, since the camshaft interacts with the rocker arm directly.

• "CMJ" called it "a grinding, drawled-out, lascivious rocker with a chisel-sharp pop aesthetic".
• In 2012, she wrote, with French punk rocker Eric Debris, "Metal Urbain: a good hippie is a dead one" which has a preface by American punk rocker Jello Biafra.
• The second type is for overhead cam engines, and uses a pair of locked-together rocker arms that are employed for each valve.
• Four of the most common wakeboard styles include the continuous rocker, the three-stage rocker, the five-stage rocker, and the hybrid rocker.
• In mid-2012 AAA introduced a new masked trio known as "Los Inferno Rockers" (Machine Rocker, Devil Rocker and Soul Rocker), a trio of masked, glam-rocker inspired wrestlers who resembled the rock band Kiss.

• The primary exhaust rocker arm contacts a low-profile camshaft lobe during low-RPM engine operation.
• Most skimboards will have some nose lift, or rocker.
• Because these engines needed a less sophisticated rocker setup, with only a single rocker shaft in each head, they were also cheaper and lighter than their "Hemi" counterparts.
• The engine itself is of an unusual triple-expansion, three-crank rocker design, with pistons [...] in diameter and [...] stroke.