Translation for 'shrink' from English to Russian

to shrink

сморщиваться [несов.]

---

shrink [coll.] [short for headshrinker]

психиатр {м}занятиемед.

• The shrink–swell capacity of soils refers to the extent certain clay minerals will expand when wet and retract when dry.
• Non-shrink grout is a hydraulic cement grout that, when hardened under stipulated test conditions, does not shrink, so its final volume is greater than or equal to the original installed volume.
• Over time, the plant's production would shrink, expand again during the Korean War, then shrink again in the 1970s, in part because of competition from low-cost Japanese and Korean steelmakers, who were accused of dumping steel at prices below cost in the Western United States.
• Rita has the ability to expand and shrink her body.
• Heat-shrink tubing is available in a variety of colors for color-coding of wires and connections.

• A shrink film can be made to shrink in one direction (unidirectional or mono-directional) or in both directions (bidirectional).
• Twit are putting all their weight down on the heads and catch the 'Dreaded Shrinks'- with their bodies compressing 'downwards.' Their head shrinks into their neck, their necks shrink into their bodies, their bodies shrink into their legs, and their legs shrink into their feet.
• The term 'shrink wrap' describes the shrink wrap plastic wrapping which coats software boxes or the terms and conditions which comes with products on delivery.
• Congenital hemangiomas are classified according to whether they shrink and go away, or do not shrink, and do not go away, or partially shrink.
• As leading-edge semiconductor features shrink, photomask features that are 4× larger must inevitably shrink as well.

• ProMach acquired the assets of Tekkra Systems of Romeoville, Illinois, provider of shrink wrapping and shrink bundling machinery.
• Natural fibres shrink more than synthetic fibres.
• Grout varieties include tiling grout, flooring grout, resin grout, non-shrink grout, structural grout and thixotropic grout.
• Separate bands of shrink film can be placed over the closure and tightened in a shrink tunnel. Some have perforations or nicks to help initiate the tear.
• As shrink fitting requires a uniform heating of the component to be expanded, it is best to try to use the lowest practical frequency when approaching heating for shrink fitting.

• Charles Beseler Company is a Stroudsburg, Pennsylvania industrial company addressing four primary markets: public and corporate steel shelving and furniture, iron shelving and storage, shrink wrap packaging and silver halide photography (film photography).
• Mechanical shrinking (sometimes referred to as sanforizing), whereby the fabric is forced to shrink width and/or lengthwise, creates a fabric in which any residual tendency to shrink after subsequent laundering is minimal.