Translation for 'the Tube' from English to Russian

the Tube [Br.] [coll.] [London Underground]

Лондонский метрополитен {м}жд

---

Advertisement

tube

труба {ж}анат.

Fallopian tube

фаллопиева труба {ж} [Tuba uterina]анат.

test tube

пробирка {ж}медтех.хим.

aluminum tube [Am.]

алюминиевая труба {ж}

aluminium tube [Br.]

алюминиевая труба {ж}

tube [e.g. tube of toothpaste, paint, glue]

тюбик {м}

the Pope

Папа {м} (Римский)религ.

the Andes

Анды {мн}геогр.

the Bronx

Бронкс {м}геогр.

the Sahara

Сахара {ж}геогр.

The Hague

Гаага {ж}геогр.

to the right

справа {adv}

(the) entity

сущее {с}спец.филос.

The Smurfs

Смурфикилит.ТВF

the environment

окружающая среда {ж}

the one

unverified самый {pron}

the deceased

усопший {м} [книжн.]

(the) tropics

unverified тропики {мн}геогр.

(the) press

печать {ж} [пресса]журн.

the past

прошлое {с}

• The explanation of these effects was that the high voltage accelerated free electrons and electrically charged atoms (ions) naturally present in the air of the tube.
• The 'puff of air' or compression wave (at around 3% greater pressure than the surrounding air) travels down the cylindrical tube and escapes at the point where the tube opens out.
• The particles of the solid stationary phase or the support coated with a liquid stationary phase may fill the whole inside volume of the tube (packed column) or be concentrated on or along the inside tube wall leaving an open, unrestricted path for the mobile phase in the middle part of the tube (open tubular column).
• or less, to facilitate the free flight of electrons from the gun(s) to the tube's face without scattering due to collisions with air molecules.
• Rolling up a hexagonal lattice along different directions to form different infinitely long single-wall carbon nanotubes shows that all of these tubes not only have helical but also translational symmetry along the tube axis and many also have nontrivial rotational symmetry about this axis.

• Pollen is released inside the tube and is collected around the growing style, and then, as the style elongates, is pushed out of the tube ("nüdelspritze").
• There are open slots in the side of the tube bottom to admit air into the stream using the Venturi effect, and the gas burns at the top of the tube once ignited by a flame or spark.
• In these inventions, the ink was placed in a thin tube whose end was blocked by a tiny ball, held so that it could not slip into the tube or fall out of the pen.
• He demonstrated this principle by attaching a thin tube to a barrel full of water and filling the tube with water up to the level of the third floor of a building.
• The formed elements are the two types of blood cell or "corpuscle" – the red blood cells, (erythrocytes) and white blood cells (leukocytes), and the cell fragments called platelets Left tube: after standing, the RBCs have settled at the bottom of the tube.

• The "built-up" method involved assembling the barrel with wrought-iron (later mild steel was used) tubes of successively smaller diameter. The tube would then be heated to allow it to expand and fit over the previous tube.
• However, an accurate measurement requires that the wind speed be directly into the open end of the tube; small departures from the true direction of the wind causes large variations in the reading.
• The major components of this concept are atomization of the sample from a graphite platform inserted into the graphite tube (L’vov platform) instead of from the tube wall in order to delay atomization until the gas phase in the atomizer has reached a stable temperature; use of a chemical modifier in order to stabilize the analyte to a pyrolysis temperature that is sufficient to remove the majority of the matrix components; and integration of the absorbance over the time of the transient absorption signal instead of using peak height absorbance for quantification.