Translation for 'test method' from English to Slovak

test method

skúšobná metóda {f}

• A common test method involves measuring the complex modulus at low constant frequency while varying the sample temperature.
• In April 2021, WP.29 GRVA issued the master document on "Test Method for Automated Driving (NATM)".
• Young's modulus can vary somewhat due to differences in sample composition and test method.
• This test method extends to the atmospheric distillation of petroleum products using a laboratory batch distillation unit to quantitatively determine the boiling range characteristics of petroleum products.
• Most widely tensile test method is used to characterize the mechanical properties of materials.

  ---

• It is a standard destructive test method used to determine the quality of gate oxides in MOS devices.
• All of the information above is collected in a calibration procedure, which is a specific test method.
• The substitution method has certain shortcomings with regard to its accuracy, but its simplicity makes it a popular field test method.
• White neutron beams—ostensibly the most representative SEE test method—are usually derived from solid target-based sources, resulting in flux non-uniformity and small beam areas.
• AAMA Voluntary Specifications allow for controlled water penetration while the underlying ASTM E1105 test method would define such water penetration as a failure.

  ---

• This test method also can detect flaws deep inside the part.
• According to the AOAC suspension test method, a sanitizer should be capable of killing 99.999% of a specific bacterial test population within 30 seconds at 25°C (77°F).
• The Food Safety and Inspection Service (FSIS) of the United States Department of Agriculture (USDA) provides a test method for analyzing cyromazine and melamine in animal tissues.
• The test method consists of pushing an instrumented cone, with the tip facing down, into the ground at a controlled rate (controlled between 1.5 -2.5 cm/s accepted).
• Performance testing applies a safe working load (SWL), or other specified load, for a designated time in a governing test method, specification, or contract.

  ---

• Measurements of compressive strength are affected by the specific test method and conditions of measurement.
• A. test method overstated the emissions from wood products factories.
• Different test methods often give different results for the same patient sample.
• Laboratory hemoglobin test methods require a blood sample (arterial, venous, or capillary) and analysis on hematology analyzer and CO-oximeter.
• Flash points of substances are measured according to standard test methods described and defined in a 1938 publication by T.L.

  ---