Translation for '
tool holder' from English to Swedish
NOUN | a tool holder | tool holders | |
NOUN article.ind sg | pl
12 translations
To translate another word just start typing!
Usage Examples English
See more ...
- A single-point cutting tool is rigidly held in the tool holder, which is mounted on the ram.
- Maudslay designed a tool holder into which the cutting tool would be clamped, and which would slide on accurately planed surfaces to allow the cutting tool to move in either direction.
- In other situations this is less than optimal, because the joint between the tool holder and the insert reduces rigidity.
- As can be seen in the pictures, a single-lip deep hole drill consists of a tool holder, a shank and the drill head (usually carbide).
- A spade drill bit for metal is a two part bit with a tool holder and an insertable tip, called an insert.
- The shorter the distance between the tool holder and the material, the less distortion created from vibration or unbalanced gyroscopic effects.
- In the case of self-maintained vibration drilling, the eigenfrequency of the tool is used in order to make it naturally vibrate while cutting; vibrations are self-maintained by a mass-spring system included in the tool holder.
- ″ in diameter or tool holders with the same or slightly larger diameters.
- New Generation Tool Holders and especially the Hydraulic Expansion Tool Holders minimise the undesirable effects of vibration to a large extent.
© dict.cc Swedish-English dictionary 2024
Contains translations by TU Chemnitz and Mr Honey's Business Dictionary (German-English only).
Links to this dictionary or to individual translations are very welcome!